RASPBERRY PI Pico Uninterruptible Power Supply

Forsiden / Komponenter / Strømforsyning / RASPBERRY PI Pico Uninterruptible Power Supply
Du må logge inn for å handle/se priser.
RASPBERRY PI Pico Uninterruptible Power Supply and I2C Control HAT for Raspberry Pi (MMP-0045)

RASPBERRY PI Pico Uninterruptible Power Supply and I2C Control HAT for Raspberry Pi

Varenr.:
MMP-0045
  • Kapasitet 15W
FIRMALEIE (ekskl. mva)
36-mnd 
13,-/mnd
Ved FIRMALEIE gjelder: Etableringsgebyr 750,-, faktureringsgebyr 75,-/mnd, minimumsordre 0,-. Frakt og mva. kommer i tillegg. Forutsetter kredittgodkjenning. Firmaleie kan velges som en betalingsmåte når du går til kassen.
Beskrivelse

UPS PIco - Uninterruptible Power Supply (HV3.0B+)


MMP-0045


Features:

  • Raspberry Pi HAT Compliant
  • Plug and Play
  • Smart Uninterruptible Power Supply (UPS)
  • Integrated 450mAh LiPO Battery (10-15 Minutes of Power Back-Up)
  • Interrupt Driven Interaction (Low Memory/CPU Use)
  • Software Driven Email Broadcasting
  • Intelligent Automatic Charger w/ Power Tracking
  • No Additional External Power Required
  • Supports LiPo & LiFePO4 (Long Life) Batteries
  • 5V 3A Power Backup for even the most demanding Pi 3 set ups.
  • Integrated Hardware Real Time Clock (RTC) with Battery Back-Up
  • File Safe Shutdown Functionality - Single Button On/Off
  • Raspberry Pi Zero/B+/2/3/3B+ Activity Pin
  • PWM FAN Control (Fan Not Included)
  • 3 User Defined LEDs
  • 3 User Defined Buttons
  • Integrated Buzzer for Audible Alerts (Buzzer Included but Not Soldered)
  • Status Monitoring - Powering Voltage, UPS Battery Voltage/Current and Temperature
  • I2C PICo Interface for Control and Monitoring
  • RS232 Raspberry Pi Interface for Control and Monitoring
  • 2-Way XTEA Based Cryptography User Software Protection
  • 2 Level Watch-dog Functionality with FSSD and Hardware Reset
  • Raspberry Pi Hardware Reset Button via Spring Test Pin (Gold Reset Pin Included)
  • Jumpers for Raspberry Pi Pin Functionality Selection
  • Stackable Header for Add-On Boards (Header Included)
  • Boot Loader for Live Firmware Update
  • Integrated ESD-Protected 3 Channel A/D 10 Bit Converters 0-5.2V
  • Integrated ESD-Protected 1-Wire Interface
  • Labelled J8 Raspberry Pi GPIO Pins for Easy Plug & Play
  • Infra Red Receiver Sensor Interface (IR Not Included)
  • Intelligent IR Remote Power ON/OFF if IR receiver installed (Not Included)
  • Upgradable with PIco Add-on Boards
  • Fits Inside Most Existing Cases
  • Events Triggered RTC Based System Actions Scheduler (ON/OFF based on RTC or Events e.g Voltage, RS232 data, A/D, IR)
  • Auxiliary 5V @ 750mA Power Output w/ Battery Backup; PPTC Fuse and Reverse Current Protected
  • The UPS PIco Uses the Following Pins
    • Serial Port (Firmware Updates): GPIO14 (Pin8) & GPIO15 (Pin10)
    • i2c Port: GPIO2 (Pin3) & GPIO3 (Pin5)
    • Pulse Train: GPIO27 (Pin13) & GPIO22 (Pin15)

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.