ADDER TECH AdderLink X2-MS-DUA Up to

Forsiden / Kommunikasjon / KVM/Dataswitch / ADDER TECH AdderLink X2-MS-DUA Up to
Du må logge inn for å handle/se priser.
ADDER TECH AdderLink X2-MS-DUA Up to 300m (X2-MS-DUAL)

ADDER TECH AdderLink X2-MS-DUA Up to 300m

Varenr.:
X2-MS-DUAL
  • Type Extender
  • Hosts 1
FIRMALEIE (ekskl. mva)
36-mnd 
394,-/mnd
Ved FIRMALEIE gjelder: Etableringsgebyr 750,-, faktureringsgebyr 75,-/mnd, minimumsordre 0,-. Frakt og mva. kommer i tillegg. Forutsetter kredittgodkjenning. Firmaleie kan velges som en betalingsmåte når du går til kassen.
Beskrivelse

SPECIFICATION:

Video resolutions - 1600 x 1280 at distances up to 200 metres/650 feet, 1280 x 1024 at distances up to 300 metres/1000 feet.

 

Extension distance - Up to 300 metres / 1000 feet using CATx cable (x=5,5e,6,7).

 

Extension technology - Differential analogue signalling for video signals, differential digital signalling for PS/2 keyboard, PS/2 mouse, audio, RS232 and DDC signals.

 

Devices supported - Supports PS/2 style keyboard, PS/2 style mouse, flat-screen and CRT style monitors with standard HD-15 video connectors, stereo speakers and microphone. Also extends transparent RS232 connections that may be used for touch-screens or a wide variety of other serial devices.

 

Cable equalisation - Finely adjustable cable equalisation amplifiers enable the video sharpness and brightness to be independently adjusted using the keyboard. Coarse and fine adjustment control is provided for quick setup. Settings are persistent even when the X2-MultiScreen is powered off which means that setup only needs to be done once. Automatic and manual equalisation modes are provided.  Each video head may be independently equalised.

 

Integral DeSkew - Red, green and blue colour signals may be independently delayed relative to the other colours to compensate for the colour skew introduced by longer CATx cables. The cable skew is produced due to wire length differences between different twisted pairs in a CATx cable that arise due to the different twist rates used to reduce signalling crosstalk. The amount of cable skew seen depends on the cable type used and the cable length. The X2-MultiScreen provides up to 62ns of DeSkew for each colour with a fine 2ns resolution. This means that high resolution video can be accurately DeSkewed even at long cable distances. The DeSkew circuitry supports 300MHz bandwidths which means that the DeSkew function does not adversely affect the video quality (a common problem on older generation extenders). DeSkew setup is easily done using the keyboard and settings are persistent even when the X2-MultiScreen is powered off which means that setup only needs to be done once. Each video head may be independently DeSkewed.

 

Keyboard control - The cable equalisation and skew settings are controlled in ‘configuration mode’ using the keyboard attached to the remote (KVM console-end) unit. Configuration mode is accessed using keyboard hotkeys. These hotkeys may also be used to lock the remote unit (if a password has been set). Hotkeys are variable and may be disabled if required. Feedback is provided to the user using the keyboard num, caps and scroll lights.

 

Indicators - The remote and local units are fitted with a link/activity indicator that shows the link status and indicate keyboard and mouse data activity.

 

Computer / KVM switch compatibility - Compatible with desktop, rack mount and laptop PCs with PS/2 keyboard and mouse connections. May also be used with RS/6000, Alpha and SGI computers and a wide range of KVM switches. Adder can provide a range of KVM switch and conversion cables for connection to PC, Sun and Macintosh computers that have USB or Sun (8-pin) connectors.

 

Operating system compatibility - Compatible with all major operating systems including DOS, OS/2, UNIX, MS Windows 9x, NT, 2000, XP NetWare and RS6000.

 

Keyboard support - Supports PS/2 style keyboards with 6-pin mini-DIN connectors. Operates in modes, 1, 2 and 3 and supports individual typematic states per key. Supports standard layout keyboards and enhanced ‘Internet style’ keyboards with extra keys. Supports all keyboard language layouts.

 

Mouse support - Supports a wide range of PS/2 style 2 button, 3 button, wheel, IntelliMouse (3 button with wheel), IntelliMouse Explorer (5 button with wheel) and other mice that support the Microsoft ® mouse signalling protocols.

 

Audio - Transmitted as digital signals to ensure high fidelity and low noise levels. 16-bit audio sampling. Supports four audio channels (stereo audio signals in both directions simultaneously). Phase locked sampling clocks ensure that there are no unwanted clicks when no sound is being played. The Local computer-end console port provides audio out only.

 

RS232 - ‘Transparent’ serial port operation ensures wide device compatibility without the need to configure baud rates or protocols on the X2 to match your equipment. Auto baud rate sensing ensures that devices that switch baud rates (such as some touch screens) are supported. All handshake lines are supported for maximum compatibility. Baud rates up to 57,600 are supported.

 

Rack mount options - Both the local (computer-end) and remote (KVM console-end) units may be rack mounted in the X-Series rack mount chassis. This chassis enables five X2-MultiScreen 2 units and four X2-MultiScreen 4 units to be mounted in 2U of 19-inch rack space. The units are rack mounted using a rack mount faceplate, which is included.

 

Connectors (Local computer-end unit) – X2-MultiScreen 2; input, 1 x 25-way female connector for keyboard, mouse, audio and first video connection, 1 x blue 15-pin high-density D-type female connector for additional video head connection, 2 x DB9 male for serial connection, 2.5mm DC jack for optional power adapter (only required for video only applications). Output for local control 1 x purple 6-pin mini-DIN female keyboard connector, 1 x green 6-pin mini-DIN female mouse connector, 2 x blue 15-pin high-density D-type female connectors for monitor connections, 1 x light green 3.5mm audio jack. Output to remote, 2 x RJ45 connector for CATx cable connections. X2-MultiScreen 4 input, 1 x 25-way female connector for keyboard, mouse, audio and first video connection, 3 x blue 15-pin high-density D-type female connectors additional video connections, 4 x DB9 male for serial connections, 2.5mm DC jack for power adapter. Output for local control 1 x purple 6-pin mini-DIN female keyboard connector, 1 x green 6-pin mini-DIN female mouse connector, 4 x blue 15-pin high-density D-type female connector for monitor connections, 1 x light green 3.5mm audio jack. Output to remote, 4 x RJ45 connector for CATx cable connection.

 

 

Connectors (Remote console-end unit) - – X2-MultiScreen 2 1 x purple 6-pin mini-DIN female keyboard connector, 1 x green 6-pin mini-DIN female mouse connector, 2 x blue 15-pin high-density D-type female connector for monitor connection, 2 x DB9 male for serial connections, 1 x light green 3.5mm audio jack and 1 x pink 3.5mm audio jack for speaker and microphone connection. 2 x RJ45 connector for CATx cable connection. 2.5mm DC jack for power adapter. X2-MultiScreen 4 1 x purple 6-pin mini-DIN female keyboard connector, 1 x green 6-pin mini-DIN female mouse connector, 4 x blue 15-pin high-density D-type female connector for monitor connection, 4 x DB9 male for serial connections, 1 x light green 3.5mm audio jack and 1 x pink 3.5mm audio jack for speaker and microphone connection. 4 x RJ45 connector for CATx cable connection. 2.5mm DC jack for power adapter.

 

 

Physical (Local computer-end unit) - X2-MultiScreen 2; Metal case (aluminium and stainless steel), 172mm x 80mm x 75mm, 430g, therefore maximum of 5 per X-Series rack mount chassis (2U of rack space). X2-MultiScreen 4 Metal case (aluminium and stainless steel), 172mm x 107mm x 75mm, 430g, therefore maximum of 4 per X-Series rack mount chassis (2U of rack space).

 

Physical (Remote console-end unit) – X2-MultiScreen 2 Metal case (aluminium and stainless steel), 172mm x 80mm x 75mm, 430g, therefore maximum of 5 per X-Series rack mount chassis (2U of rack space). X2-MultiScreen 4 Metal case (aluminium and stainless steel), 172mm x 107mm x 75mm, 430g, therefore maximum of 4 per X-Series rack mount chassis (2U of rack space).

 

Power – Console-end (remote) X2-MultiScreen 2 is powered by an external 5V DC, 2A power supply with an IEC power cable connection. A country specific power cord is provided. X2-MultiScreen 4 is powered by an external 5V DC, 4A power supply with an IEC power cable connection. A country specific power cord is provided. Computer-end (local) X2-MultiScreen 2 is normally interface powered via the PS/2 keyboard connection but may alternatively be powered using an optional, external 5V DC, 2A power supply supply. X2-MultiScreen 4 is powered by an external 5V DC, 4A power supply with an IEC power cable connection. A country specific power cord is provided. Both units are fused with auto resettable fuses.

 

Flash upgrades - The X2-MultiScreen 2 and X2-MultiScreen 4 remote and local units are flash upgradeable to take advantage of product enhancements and upgrades. The units may be flash upgraded via the PS/2 keyboard ports from a connected computer. Flash upgrade mode is accessed using option switches mounted on the side of the local and remote units.

 

Password protection mode - The X2-MultiScreen 2 and X2-MultiScreen 4 may be locked using a hotkey combination from the keyboard if a password has been loaded into the unit. The unit may then only be unlocked using the password. The video is blanked whilst the remote unit is locked.

 

Spike suppression – The X2-MultiScreen 2 and X2-MultiScreen 4 are fitted with spike suppression circuits.

 

Application - The X2-MultiScreen 2 and X2-MultiScreen 4 are not suitable for linking between buildings.

 

Display Data Channel - DDC signalling is supported to enable the computer to communicate with the monitor and thus configure its video card for optimal operation.

 

Package contents - X2-MultiScreen 2 Local (computer-end) unit, remote (KVM console-end) unit, 1 x 2 metre long computer interface cable for keyboard, mouse, audio and first video connection, 1 x 2m video cable blue 15-pin high-density D-type female connectors, 1 x computer serial interface cable, IEC style power supply and power cord, safety and installation leaflet, CD manual, stick on rubber feet, X-Chassis fixing plate with screws. X2-MultiScreen 4 Local (computer-end) unit, remote (KVM console-end) unit, 1 x 2 metre long computer interface cable for keyboard, mouse, audio and first video connection, 3 x 2m video cable blue 15-pin high-density D-type female connectors, 1 x computer serial interface cable, 2 x IEC style power supply and power cords, safety and installation leaflet, CD manual, stick on rubber feet, X-Chassis fixing plate with screws.

 

Optional accessories - X2-MultiScreen 2 Optional power adapter for local unit (part code: PSU-IEC-5VDC), X-Series rack mount chassis (part code: X-RMK), X-PDM4-UK. X2-MultiScreen4 X-Series rack mount chassis (part code: X-RMK), X-PDM4-UK

 

Approvals - FCC class A, CE marked.

 

Power – Operating Voltage: 100-240VAC, Power Frequency: 50-60Hz  

 

Temperature Tolerance – 0-40°C (32 to 104°F)

 

Humidity Tolerance – 5 to 60% non condensing

 

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.